Reconnect Garmin Watch – legacy version For PC (Windows And Mac) Free Download

Rate this post

Are you looking for a way to reconnect your Garmin watch – legacy version? If so, you’ve come to the right place. In this article, we will show you how to reconnect your watch in just a few simple steps. So, what are you waiting for? Let’s get started!

First, you will need to make sure that your watch is turned on and that it is in the correct mode. Next, you will need to open the Garmin Connect app on your smartphone. Once the app has loaded, you will need to select the “Devices” tab at the bottom of the screen.

Now, you will need to select your watch from the list of devices. Next, you will need to select the

The latest Reconnect Garmin Watch – legacy version for PC has come up with a few updates that are better than the previous version. Want to know those? Here are they:

Reconnect Garmin Watch – legacy version Andorid App Summary

Martin Birk has developed the Reconnect Garmin Watch – legacy version for Android. You can find it under the Sports category on Play Store. Since its inception, Reconnect Garmin Watch – legacy version has got over 27451+ users on board. For the user rating, it is currently holding a 0.0 rating and the latest version of it is 1.80L5

The latest update of Reconnect Garmin Watch – legacy version is Nov 12, 2018 for phones. You can’t use it on your PC directly. So, you have to use an Android emulator like BlueStacks Emulator, Memu Emulator, Nox Player Emulator, etc.

No worries, we will discuss the methods to run it on your computer using the emulators whether you use a PC or Mac. Follow the methods we’ve discussed below.

Reconnect Garmin Watch – legacy version App Overview and Details

The app keeps the connection to your watch and reconnects the watch after being away from phone. It runs in the background and battery usage is very low.

NOTE: This is a legacy version for Android 4, 5 and 6 of my app Reconnect Garmin Watch. It can also be used on Android 7 and 7.1.

The app works for Fenix 3/5, Forerunner 235/735XT/920, vivoactive HR and other models.

When you run the app the first time, it will start Setup. Please follow the instructions exactly.

Huawei phones: Please see text at the bottom

Troubleshooting:
>> On Galaxy phones, you may have to reboot the phone and force stop the “Bluetooth share” app (go to phone Settings – Applications, show system apps – Bluetooth share – Force Stop).

>> When Vivoactive HR disconnects, sometimes you have to go into Garmin Connect menu – Garmin Devices, and then turn off Bluetooth on the phone. Connect should prompt you to turn on Bluetooth again; do it and wait 10-20 sec, and then the watch should reconnect. (You should also have Location Services turned on in Android settings!)

>> Some phones (like Lenovo) may only work if the watch BLE-ANT firmware is downgraded. You need to Google a file called something like GUP1909.BIN and upload it to the watch from a computer.

>> If the watch shows it’s CONNECTED but you don’t get any notifications:
* Open Garmin Connect and select Settings – Smart Notifications. Disable and enable one of the notifications, like Incoming Calls. This could make Connect ask for permissions.
* If it keeps asking for permissions even though you gave permission then restart the phone.
— If it doesn’t ask for permissions:
* Go to your phone’s Settings – Apps – Connect – Permissions and enable all permissions

Issues with Garmin Connect on some Huawei phones:
You can try the following.
* Turn off Location Services on your phone and then try to add the watch in Garmin Connect
– OR –
* Install and run the app “Bluetooth pair”
– OR –
* Solution from fin:
https://forums.garmin.com/forum/on-the-trail/wrist-worn/fenix-3/1271446-unable-to-pair-fenix-3-with-android-7-0-phone

Latest status from Garmin on this issue:
https://support.garmin.com/faqSearch/en-US/faq/content/pvL8aWsaLU2iKyvF8VrpP9

Features of Reconnect Garmin Watch – legacy version for PC

user “Dirk” (see comments):
“On my Huawei P10, I installed “Bluetooth Share” and “Garmin Connect”. I also had to enable “Location” in the settings of both apps. Now it works perfectly.”

1. App keeps connection to watch and reconnects after being away from phone
2. Runs in background and has low battery usage
3. Works with Fenix 3/5, Forerunner 235/735XT/920, vivoactive HR and other models
4. Starts Setup when run for first time
5. Follows instructions exactly for Setup
6. Huawei phones: Please see text at bottom for troubleshooting
7. Some phones (like Lenovo) may only work if watch BLE-ANT firmware is downgraded
8. App needs no permissions to run
9. Keeps track of notifications and allows user to enable all permissions
10. Solution from user “Dirk” for Huawei phones: install “Bluetooth Share” and “Garmin Connect” and enable “Location” in both apps’ settings.

Install “Reconnect Garmin Watch – legacy version” on PC: Windows 10/8/7 & Mac

If you want to run the Reconnect Garmin Watch – legacy version on your PC, you’ll need the Memu android emulator. Here is the process of installing both on your PC:

  • Download the Memu android emulator on your computer and install it. It will take a few minutes from start to finish.
  • While finishing, keep the Open when finished checked and other additional offers unchecked.
  • Once installed and opened, you’ll see a familiar interface with familiar apps on the screen, including Play store.
  • Click on the Play store and log into your account using your google email and password that you use on your phone.
  • You can now search for the Reconnect Garmin Watch – legacy version app within Play store. It will show you the app on the search results in the first position.
  • Click on the app name and then click install to begin the download process on your computer to install Reconnect Garmin Watch – legacy version.
  • It may take a few minutes for the entire process. Once complete, you can now open the app from your desktop or the emulator homepage.
Reconnect Garmin Watch – legacy version App Specification
App Name: Reconnect Garmin Watch – legacy version On Your PC
Devoloper Name: Martin Birk
Latest Version: 1.80L5
Android Version: 4.4
Supporting OS: Windows,7,8,10 & Mac (32 Bit, 64 Bit)
Package Name: mabi.android.gcmrunner_legacy
Download: 27451+
Category: Sports
Updated on: Nov 12, 2018
Get it On:

Download

Whats New In this Reconnect Garmin Watch – legacy version?

NOTE: I am NOT from Garmin

Version 1.80L5 – 12-Nov-2018
* Error corrections

Conclusion

Although the Reconnect Garmin Watch – legacy version application is no longer supported, it still provides a valuable function for users. The application allows users to reconnect their Garmin watch to their phone, which can be useful if the watch has been disconnected for any reason. Additionally, the application provides a way for users to view their activity data and track their progress. Overall, the Reconnect Garmin Watch – legacy version application is a useful tool that can help users stay connected to their Garmin watch.

So, did you find the guide on how to download the Reconnect Garmin Watch – legacy version for PC above? If you did, or if you have any questions regarding it, do comment and let us know. We’re here to help.

Disclaimer

We refer the ownership of This Reconnect Garmin Watch – legacy version to its creator/developer. We don’t own or affiliate for Reconnect Garmin Watch – legacy version and/or any part of it, including its trademarks, images, and other elements.

Here at orionsoftlab, we also don’t use our own server to download the Reconnect Garmin Watch – legacy version. We refer to the official server, store, or website to help our visitors to download the Reconnect Garmin Watch – legacy version.

If you have any query about the app or about orionsoftlab, we’re here to help you out. Just head over to our contact page and talk your heart to us. We’ll get back to you ASAP.

What’s your Reaction?
+1
0
+1
0
+1
0